A nasty problem suggesting underlying problems on your HDB walls might be paint flaking or peeling. Given such difficulties, one must obtain professional HDB painting services. Early treatment of the problem is absolutely vital whether the peeling is from moisture, poor surface preparation, or fading paint. Our specialty at Painting Service SG is providing knowledgeable and consistent HDB painting services meant to fix peeling paint and bring your walls back to their original splendor. This basic, follow-through technique will help you fix peeling paint so the results last.
Why would paint peel on HDB walls?
Knowing the causes of peeling paint can help one to start the repair process. A few typical justifications are:
- Extreme humidity or water leaks: Too much moisture causes peeling and bubbling by weakening paint adherence.
- Insufficient surface readiness: Ignoring to prime, clean, sand, or prepare the wall before painting results in poor adherence.
- Paint aged naturally: Paint loses its capacity to properly bind to walls with time.
- Painting over a poorly prepared or incompatible surface might cause incompatible paint coats to peel.
Finding the fundamental cause will enable you to prevent the problem from returning following repairs.
Your Specifications for the Role
Gathering the tools and resources below will help to ensure a flawless workflow:
- Plastic or canvas drop cloth
- Tape for artists: for painters especially
- Paint scraper or wire brush
- Correcting compound
- Puck-knife
- Sand with little grains
- Tack cloth or a damp sponge
- Primer paint (such as Nippon Odorless EasyWash or Nippon Vinilex 5000)
- Brush or roller
First Step: Prepare Your Working Environment
Good paint work depends on planning. You could start as follows:
- Don gloves, goggles, and a mask to protect yourself from paint fumes and dust.
- To collect any mess, lay down a canvas or plastic drop cloth.
- Cover trim, baseboards, and other surfaces you want to save using painter’s tape.
- Clear furniture, carpets, and other objects to avoid inadvertent damage.
Second Step: Remove Peeling Paint
You have to first clear all loose paint before adding a fresh coat.
- Using a wire brush or paint scraper, gently peel paint. Steer clear of too strong pressure since it may damage the surface under.
- To soften paint for simpler removal in tough locations, think about utilizing a heat gun or chemical paint remover.
- Before beginning, make sure the surface is absolutely clean and clutter-free.
The Third Step Is Repairing Holes and Cracks
Look at your wall for cracks, holes, or other defects once the peeling paint has been taken off. Perfect completion depends on fixing these problems:
- Patch any cracks or holes with a putty knife using mending compound.
- Evenly smooth it and use manufacturer’s drying times guidelines.
- Smooth the fixed sections using fine-grit sandpaper.
Fourth Step: Smooth the Ground
Perfect surface and appropriate paint adherence depend on sanding.
- Using fine-grit sandpaper, smooth the whole region where the paint was taken off.
- This stage helps remove any last paint residue and guarantees that the rebuilt surface blends organically with the rest of the wall.
- To be sure the sanded area feels even and smooth, run your palm over it.
Step Five: Clean the Area
Paint adhesion depends critically on a clean surface.
- Dust and trash from the sanded surface can be cleaned with a tack cloth or a somewhat moist sponge.
- Before moving on, let the area dry totally.
- Once more wipe the area with a dry cloth to remove any last traces of moisture for best results.
Step Six: Primer Application
Sealing the surface and guaranteeing long-lasting effects depend on primer application.
- Use a moisture-resistant primer, such an oil-based sealer or anti-mould ceiling paint, should moisture be the cause of the peeling paint?
- Over the ready surface, roll or brush an even coat of primer.
- Use the manufacturer’s drying times guide.
- Primer makes paint adhesion constant and improves finish.
Step 7: Perfect the Wall
Your wall is ready for another layer of paint. These guidelines can help you get best results:
- Select luxury paint fit for HDB walls. Painting Service SG advises Nippon Vinilex 5000 for its odourless formula and lifetime or Nippon Odourless EasyWash for simplicity of use.
- Using a roller or brush, equally apply the first coat of paint.
- If needed, let the paint dry totally before applying a second application.
- Once the paint has set, pull off the painter’s tape and drop cloths.
- Love your freshly cleaned wall with perfect finish!
Guideline for Stopping Future Paint Peeling
Use these guidelines to stop paint from peeling further:
- Management of moisture: Fix any water leaks then lower humidity with dehumidifiers or ventilation fans.
- Proper surface readiness: Before painting, clean, sand, and primally walls.
- Choose the correct paint color: For humid situations, use moisture-resistant paints like Vinilex 5000 or Nippon Matex White.
- Maintain your walls: To stop wear and tear, routinely check and wash your walls.
Why Select SG Painting Services?
Trusted name for HDB painting services in Singapore is Painting Service SG. Homesowners rely on us for the following reasons:
- Knowledge in addressing several wall issues, including flaking paint.
- For long-lasting results, use premium paints as Nippon Matex White and Nippon Vinilex 5000.
- Comprehensive services include surface preparation, painting, and post-job cleanup.
- Reasonably priced quotes free of obligation catered to your requirements.
In the End
Correcting chipping paint on your HDB walls is not difficult. Using the correct tools, techniques, and advice from Painting Service SG will help you to restore your walls and improve the appeal of your house. Our experienced crew is here to help with basic touch-ups or thorough repain planning.
Contact Painting Service SG now for professional advice, reliable services, and a free painting quotation. Out of your HDB walls, let us design a flawless masterpiece.
